{"id":22601,"date":"2026-06-16T16:42:53","date_gmt":"2026-06-16T14:42:53","guid":{"rendered":"https:\/\/www.red-on-line.com\/?p=22601"},"modified":"2026-06-16T16:49:50","modified_gmt":"2026-06-16T14:49:50","slug":"ehs-legal-alert-gb-new-hse-guidance-bans-dry-cutting-of-engineered-stone","status":"publish","type":"post","link":"https:\/\/www.red-on-line.com\/gb\/blog\/ehs-legal-alert-gb-new-hse-guidance-bans-dry-cutting-of-engineered-stone\/","title":{"rendered":"GB – New HSE guidance bans dry cutting of engineered stone"},"content":{"rendered":"\n
The announcement of the new ban on dry fabrication coincides with the beginning of a nationwide inspection program, which will see HSE inspectors conducting more than 1000 visits to fabricators across Great Britain, with enforcement action taken against those failing to meet the required standards. This inspection program will continue for a 12-month period and the first inspections are already underway.<\/p>\n\n\n\n
Recent research done by the HSE has found that dry fabrication typically results in exposure to respirable crystalline silica (RCS) five to ten times higher than wet methods using equivalent tools. It has also found that lower-content silica engineered stone is available at the same quality, removing any reason for businesses not to switch to less dangerous products. These findings have led to the HSE\u2019s decision to ban dry fabrication of engineered stone as an unacceptable method of stone cutting.<\/p>\n\n\n\n
To provide clarity to businesses and workers, HSE has published its first-ever COSHH (Control of Substances Hazardous to Health) guidance sheet specifically for engineered stone. The guidance sets out in plain English the legal requirements which employers must observe in relation to engineered stone. These requirements include the following:<\/p>\n\n\n\n